![]() |
![]() ![]() |
![]() |
![]()
Post
#1
|
|
Forum Member Group: Members Posts: 2 Joined: 11-November 02 From: Alburtis, PA Member No.: 126 ![]() |
After working fine for quite a while, this morning I can no longer print in PM View. I get a popup window that says', "unable to retrieve printer information"
I removed and reinstalled the printer driver (which is the latest version from HP) without any change. Printing is fine within other applications. Below is system information captured within PM View: Application Product name : PMView 2000 for Windows Version : 2.32 Build : 17832 Graphics Screen size : 1024x768 pixels Bit depth : 32 bits Plane count : 1 plane Uses palette : No Refresh rate : 60 Hz Raster caps : 7E99 Screen Physical size : 254x203 mm Resolution : 96x96 dpi Processor & memory Number of CPUs : 1 CPU family : 15 CPU model : 2 CPU stepping : 4 Page size : 4096 bytes Physical RAM : 511 MB Operating system Operating system : Windows NT Version : 5.0 Service Pack 3 Build : 2195 Vic -------------------- Take care,
Vic |
|
|
![]()
Post
#2
|
|
![]() Forum Member Group: Admin Posts: 672 Joined: 14-March 00 From: Wilmington, North Carolina Member No.: 3 ![]() |
Stop PMView and start regedit. Then delete the PMView "Print" entry and all its subkeys:
HKEY_CURRENT_USER/Software/Nielsen Software/PMView/2.0/Print Does this help? Edited By Peter on 1037027725 -------------------- Peter Nielsen (peter@pmview.com) "If you can dream it, you can do it" JFK.
|
|
|
![]()
Post
#3
|
|
Forum Member Group: Members Posts: 2 Joined: 11-November 02 From: Alburtis, PA Member No.: 126 ![]() |
Peter,
Thank you. Deleting that key solved the printing problem. After the key was deleted, I went back restarted PM View and was able to print just like before. Vic -------------------- Take care,
Vic |
|
|
![]()
Post
#4
|
|
![]() Forum Member Group: Admin Posts: 672 Joined: 14-March 00 From: Wilmington, North Carolina Member No.: 3 ![]() |
Thanks for letting me know that this solved the problem.
![]() The next version will do this automatically. If PMView gets to the point that it cannot retrieve the printer information, it will reset the printer info (only the info stored in PMView's own registry, of course) and try again without it. This is the way it should be done and is arguably a bug in the current version (2.32) since it fails to reset to the default info if a problem appears. Thanks, -------------------- Peter Nielsen (peter@pmview.com) "If you can dream it, you can do it" JFK.
|
|
|
Guest_Vic Abeloff_* |
![]()
Post
#5
|
Guests ![]() |
You're welcome. I've been using PM View since it's OS/2 days and am a very happy user. Thanks for all you efforts.
Vic |
|
|
Guest_Dan_* |
![]()
Post
#6
|
Guests ![]() |
I had the same problem that Vic had. However, it was only after I added a new printer. I saw the other two printers I've used to print before in the registry. I deleted the Print keys and all of its subfolders as suggested but that did not help. I even uninstalled and reinstalled and that didn't help. In fact the Print key is not visible after I reinstalled PMView. Any suggestions???
|
|
|
![]()
Post
#7
|
|
![]() Forum Member Group: Admin Posts: 672 Joined: 14-March 00 From: Wilmington, North Carolina Member No.: 3 ![]() |
If you have PMView Pro, then right-click on the "Setup" button in the print dialog and select "Reset" from the popup menu.
-------------------- Peter Nielsen (peter@pmview.com) "If you can dream it, you can do it" JFK.
|
|
|
Guest_Dan_* |
![]()
Post
#8
|
Guests ![]() |
I'm running 2.32. I got it working again. I uninstalled PMView. I had about 20 printers installed and I just simply deleted them all but my default. I then installed PMView again and the printer worked. The PRINT keys are showing up in the registry now. Thanks for the quick response. Your support is awesome. I've been a long time registered user.
Daniel King |
|
|
![]()
Post
#9
|
|
![]() Forum Member Group: Admin Posts: 672 Joined: 14-March 00 From: Wilmington, North Carolina Member No.: 3 ![]() |
I'm glad to hear that you got the problem solved. If one of the installed printer drivers is not returning the expected values, PMView 2000 v2.32 does not handle the situation well and you may end up in the situation you just described (just an error message and no print dialog). The best solution is to do exactly what you did, and delete all drivers.
FWIW, PMView Pro behaves better in this situation thanks to a few improvements in this area. Thanks, -------------------- Peter Nielsen (peter@pmview.com) "If you can dream it, you can do it" JFK.
|
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 27th April 2024 - 08:46 AM |