I have Epson Stylus CX60, and really I can't print image, which is greater than ~6000*4000 (smaller can be printed in all cases, sometimes it's possible to get something like ~4400*6600, but not more).
When i say "print" - I get "clock", and after ~5 seconds clock is "off", but no information in printer queue. If smaller image printed (and all is OK) - printing process goes some minutes, not seconds.
No error message displayed, just nothing is printed :-(
Any ideas? (OS/2 ACP2, 512MB memory)
Have you enabled OS/2 HMS (High Memory Support) ?
------------------
Peter Nielsen (peter@pmview.com) "If you can dream it, you can do it" JFK.
It sounds like this is a limitation caused by how the Epson driver is implemented. For instance, I believe that this problem would surface in case the driver for some reason is using a native OS/2 bitmap to hold the print data. (The size of an OS/2 bitmap is limited, so this is a likely reason).
------------------
Peter Nielsen (peter@pmview.com) "If you can dream it, you can do it" JFK.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)