![]() |
![]() ![]() |
![]() |
![]()
Post
#1
|
|
Forum Member Group: Members Posts: 3 Joined: 9-June 03 From: Germany Member No.: 149 ![]() |
Hi!
I have the following problem. (I am using PMView 3.24.) I load a jpg-picture with greyscale. If i manually convert it to black/white (2bit) and save it as pcx, everything is ok. The original file has about 250 kb, the new picture has about 77 kb and when I load the new pcx file, 2bit as colour depth is shown! But, when I do the same with the batch conversation, the new pcx file is 8bit and the colour count is 251 an NOT as expected 2. I do the following steps in batch conversion (I hope the translation is correct, because I use the german version): - conversion to b/w (with -75 %) - change the size (nothing to do with my problem) - save it as .pcx Even if I insert the function "conversation to subscripted colour" as the 2nd step, with the setting to 2 colours, the new .pcx file remains 8bit. Is there anything I am doing wrong or is this a bug? Thank you very much in advance. Bye says Oliver |
|
|
![]()
Post
#2
|
|
![]() Forum Member Group: Admin Posts: 672 Joined: 14-March 00 From: Wilmington, North Carolina Member No.: 3 ![]() |
change the size (nothing to do with my problem) Are you sure this is not the problem? If interpolation is enabled during resizing, shades of gray will result. Turn off the "Resample Pixels" ("Bildpunkte interpolieren") resize option, and the result should remain black&white. Thanks, Peter -------------------- Peter Nielsen (peter@pmview.com) "If you can dream it, you can do it" JFK.
|
|
|
![]()
Post
#3
|
|
Forum Member Group: Members Posts: 3 Joined: 9-June 03 From: Germany Member No.: 149 ![]() |
|
|
|
![]()
Post
#4
|
|
![]() Forum Member Group: Admin Posts: 672 Joined: 14-March 00 From: Wilmington, North Carolina Member No.: 3 ![]() |
Is it planned to implement batch conversation within subfolders? Nobody has requested this feature...You could easily do this from an OS/2 command prompt by writing a REXX script... BTW, I would suggest leaving interpolation enabled and instead doing the B/W conversion as the last step. Thanks, Peter -------------------- Peter Nielsen (peter@pmview.com) "If you can dream it, you can do it" JFK.
|
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 26th April 2024 - 12:36 PM |