PMView.com

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Screen Capture: Part Of Selected Area Only
DavidHS
post May 3 2008, 12:23 PM
Post #1


Forum Member


Group: Members
Posts: 6
Joined: 21-July 07
Member No.: 2,459



I select a large area of the screen to capture but the area actually captured is smaller than my selection. The actual image size captured varies around 1300 x 900 pixels.

This is on running PMView Pro 3.51 with Vista SP1.
My display resolution is 1920 x 1200.

Is there some subtle Vista or PMView limit at work here?

A possible factor: This PC is a laptop with a native resolution of 1400 x 1050 but displaying onto a larger external screen. The video card and driver are well capable of running this screen at the full 1920 x 1200. I have rebooted (a number of times) since starting to use this larger screen.

I note also that IrfanView exhibits similar behaviour, although the size captured seems to be slightly smaller.

So, do we have some Vista issue here?
Go to the top of the page
 
+Quote Post
Peter
post May 6 2008, 01:41 PM
Post #2


Forum Member


Group: Admin
Posts: 664
Joined: 14-March 00
From: Wilmington, North Carolina
Member No.: 3



This sounds like a setup issue. Is the notebook's screen disabled?

Windows (and hence PMView) limits capturing to the size of the desktop. You may have to configure the desktop size to fill all of your screen (in display settings). If the notebook screen is enabled, Vista may possibly limit what kind of configuration you're allowed to.

Take a good look in your Control Panel/Display Settings, and you might see what's going on.


--------------------
Peter Nielsen (peter@pmview.com) "If you can dream it, you can do it" JFK.
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: 15th November 2018 - 09:01 PM